Disc Washers are conically formed angular Discs, which are loaded in the axial direction. Disc Washers offer a well-developed solution to many engineering problems. Through a unique combination of high force in a small space, Disc Washers can be used as single disc or arranged in stacks. A spring stack can consist of either single spring or parallel spring sets. Disc Washers are available with or without contact flats. Disc Washers and Belleville Washers are manufactured to DIN 2093 AND din 6796. We have computerized design programmed to assist our customers for their specified applications. Disc Washers are manufactured from imported 50CrV4 and EN42J material. Our Disc Washers are AUSTEMPERED. This method of heat treatment is particularly effective for springs, as it gives the maximum toughness and therefore considerable durability.
Disc Washers Stack Compared to Helical Spring.
Note that the same load is achieved at substantial reduction in space. Disc stacks may be designed for extremely high loads where coil springs are not feasible at all.
© 2005-09 Shiv Sagar Industries
|Site by : WebWork|